Liquid Elements Base Coat 9H Ceramic Coating

Liquid Elements Base Coat 9H Ceramic Coating

The Base Coat 9H is a ceramic coating with the main function of forming a very hard surface (9H), which lies over the vehicle parts. Due to the extremely complex and high-quality formulation, in which only 98% active ingredients are used, an extremely hard ceramic coating is applied to the vehicle outdoor area, which offers a very long protection. This product is highly recommended in combination with the Liquid Elements Eco Shield. The applied Base Coat 9H in this combination provides a hard, shiny surface, with which the Eco Shield can form a perfect connection. In the second step, the Eco Shield serves for a strongly hydrophobic, smooth and also even shinier surface. You get extensive protection against scratches and other defective, an enormous gloss, as well as a strongly beading, smooth and hydrophobic surface.With the combination of Eco Shield and Base Coat 9H, dirt and dirt have little chance of adhering to the vehicle surface and can be removed very easily. Car washing has never been so easy, fast and paint-protecting at the same time.

properties:

• Compatible on all materials in the vehicle outdoor area:
• Paint, glass, foil, plastic, headlights, immovable rubber parts
• Extremely easy to process
• Hard protective layer with degree of hardness: 9H
• Long-term protection for the entire outdoor area
• Very easy to clean surface
• Perfect substrate for Liquid Elements Eco Shield
• In combination with Eco Shield, the perfect combination for vehicle protection
• Increases service life of the Eco Shield
• Up to 2 years shelf life
• Ideal also suitable for all types of rims
• Chrome rims, aluminum rims, steel rims
• Resistant to cleaners with PH values between 4 - 11
• Can also be used stand alone (protection function)

application:

Before application, the paint should be washed to the best possible condition, kneaded and prepared. Of course, each user can define the best possible condition for himself, it depends on the individual satisfaction. After polishing, the paint should be degreased again with IPA. The application can then begin.

1. Scatter application wipes around an applicator block yellow and dribble 5-6 drops of Base Coat 9H on it.
2. On an area of approx. 80x80cm neatly distribute, so that a closed layer forms.
3. Leave on for a minimum of 30 seconds to a maximum of 5 minutes (depending on temperature and humidity).
4. With an eraser microfiber cloth carefully remove all residues so that nothing is visible on the paint.
5. If necessary, repeat the process after a maximum of 30min (max two layers possible)
6. Allow to harden for a maximum of 30 minutes without stress before Liquid Elements Eco Shield is applied.

hints:

• Only use in well-lit rooms to ensure residue-free removal
• 50ml are sufficient for about 3 - 9 vehicles depending on the number of shifts.
• Do not apply on hot surfaces
• Open for about 2 years with cool storage (recommended in the refrigerator or in the basement)
• Protect against frost
• The ambient temperature during application and curing should be at least +10°C, optimal are 20°C

Works with:

• Eraser microfiber cloth
• Scatter Applicator

Variant 50ml Base Coat 9H
Delivery: Base Coat 9H in glass bottle with dosing insert