Liquid Elements T4000 V2 Polishing Machine 15mm Stroke Set Basic

Liquid Elements T4000 V2 Polisher 15mm HUB Set Basic

Consisting of:

1x Liquid Elements T4000 V2 Eccentric Polisher 15mm HUB
1x Liquid Elements Centriforce V2 High Gloss Polishing Pad green (fine) 125mm
1x Liquid Elements Centriforce V2 Medium Polishing Pad yellow (medium) 125mm
1x Liquid Elements Centriforce V2 Sanding-Polishing Pad red (coarse) 125mm

_____________________________________

Liquid Elements T4000 V2 Eccentric Polisher 15mm HUB

The Liquid Elements T4000 V2 Eccentric Polisher with a 15mm eccentric HUB, the standard 125mm backing plate, and a power of 950 watts is suitable for everyone. Due to the high motor power, the free-spinning rotation of the backing plate doesn't stop even when encountering slight tilting on curved surfaces.

Whether you're an absolute novice in vehicle detailing or a professional detailer, this machine is suitable for every user.

The modern design of the eccentric polisher, comfortable grip, and robust, smooth electronics make the T4000 V2 stand out. The two LED lights on top of the polisher indicate the correct pressure range during the polishing process. When the green LED bulb lights up, the pressure is sufficient; when the red LED bulb lights up, the pressure on the surface must be reduced.

The following changes and improvements have been made compared to the previous model:

- More powerful motor with corresponding gear ratio for power up to 950 watts

- Torque control display via green and red LEDs

- Increased smoothness

- Ergonomic handrest at the head of the polisher with extended rubber coating

- Design adjustment

Technical Data

- Voltage: 230V~

- Frequency: 50Hz

- Power consumption: 950 watts

- HUB speed: 2000-5000 min -1

- Disc diameter: max. 125mm

- Spindle size 5/16" -24

- Weight: 2.7kg

- Lpa (sound pressure): 84dB (A)

- Lwa (sound power): 95dB (A)

- Cable length: 8 meters

Features

- 950 watts of power

- 15mm eccentric mechanism

- Low vibration

- Constant speed control with remote electronics

- Torque control display via green and red LEDs

Carbon Brushes

The pre-installed carbon brushes (1 pair) in the machine have an average lifespan of approximately 350 hours of pure usage, which corresponds to the detailing of about 50 vehicles. This assumes correct handling and use of the machine during the polishing process, as the lifespan of the carbon brushes can otherwise vary significantly. Note: The machine comes with replacement carbon brushes as standard, so there are 2 pairs of carbon brushes included in the delivery.

Scope of Delivery

- Pre-assembled 125mm backing plate

- Liquid Elements storage bag

- Replacement carbon brushes

- Allen key

- User manual