Liquid Elements T3000 V2 Eccentric Polishing Machine & 6 Centriforce 125mm Polishing Pads

Liquid Elements T3000 V3 Eccentric Polishing Machine + 6 Centriforce 125mm Polishing Pads KIT

composed of:

• 1 x Liquid Elements T3000 V3 Eccentric Polishing Machine
• 2 x Liquid Elements Centriforce V2 Standard - Polishing sponge yellow (medium) 125mm
• 2 x Liquid Elements Centriforce V2 Heavy Cut - Polishing sponge red (heavy cut) 125mm
• 2 x Liquid Elements Centriforce V2 High Gloss - Polishing Sponge Green (Fine) 125mm

Liquid Elements T3000 V3 Eccentric Polishing Machine 10mm HUB

The Liquid Elements T3000 V3 eccentric polishing machine is suitable for everyone with 10mm eccentric HUB, the standard mounted 125mm support plate and a power of 750 watts. Due to the constant posture with remote electronics, the free-rotating rotation of the support plate does not stop even with slight tilts on round surfaces.

Whether absolute newcomer to vehicle preparation or professional - conditioner, this machine is something for every user.

With the modern design of the eccentric polishing machine, particularly pleasant feel, as well as robust and smooth-running electronics, the T3000 stands out in particular. The two LEDs on the top of the polishing machine indicate the correct pressure range during the polishing process. If the green LED bulb is sufficient, the red LED bulb lights up, the pressure on the surface must be reduced.

specifications

- Voltage: 230V~

- Frequency: 50Hz

- Power consumption: 750 watts

- Lifting speed: 2500-5500 min -1

- Disc diameter: max. 125mm

- Spindle size 5/16" -24

- Weight: 2.4kg

- Lpa (sound pressure): 84dB (A)

- Lwa (Sound Power): 95dB (A)

- Cable length: 8 meters

properties

- 750 Watt power

- 10mm eccentric mechanism

- Low vibration

- Speed constant with remote electronics

- Torque control display via green and red LED

- Optionally also to operate with 75mm support plate

Carbons

The pre-assembled carbon brushes (1 pair) in the machine have an average service life of about 350 hours of pure service life, which corresponds to a reconditioning of about 50 vehicles. This requires the correct handling and use of the machine during the polishing process, as the service life of the carbon brushes can otherwise vary greatly. Note: Replacement carbon brushes are always included with the machine as standard, so 2 pairs of carbon brushes are available in the delivery.

scope of delivery

- Already mounted 125mm support plate

- Liquid Elements storage bag

- Replacement carbon brushes

- Allen key

- Instruction manual

Liquid Elements Centriforce Polishing Sponges

The Liquid Elements "Centriforce" polishing sponges or polishing pads are a revolution in car care.For these polishing sponges, the best possible foam from German production was used. The foam, specially developed for vehicle care, offers the best quality and promises a long service life.The specially developed hole in the middle of the polishing sponges ensures better cooling and generates centrifugal forces that center and make better use of the effect of the polish.

A suitable pad has been developed for every application in the Liquid Elements "Centriforce" series and the general processing is unparalleled in the industry. The Liquid Elements "Centriforce" polishing sponge series offers an unbeatable price / performance ratio and is particularly recommended for large lifting machines from 10mm stroke.

specifications:

Colour: greenPurpose: Processing of finish and high-gloss polishesDiameter of the foam: 145mmDiameter of the support plate Holder (Velcro) : 130mm suitable for 125mm Support plate.Height / Thickness : 30mmSurface structure: flat, with centered, conical hole

Colour: redPurpose: Processing of grinding polishesDiameter of the foam: 145mmDiameter of the support plate Holder (Velcro) : 130mm suitable for 125mm Support plate.Height / Thickness : 30mmSurface structure: flat, with centered, conical hole

Colour: yellowPurpose: Processing of standard (medium-strength) polishesDiameter of the foam: 145mmDiameter of the support plate Holder (Velcro) : 130mm suitable for 125mm Support plate.Height / Thickness : 30mmSurface structure: flat, with centered, conical hole